Home » Mountain Division » Building Options » Doors
Door Options - Mountain Division
Porches, Sheds & Overhangs | Skylights Polycarbonate | Ventilation & Cupola | Doors | Windows | Insulation | Equestrian | More Options
Walk Door
- Pre-hung door with keyed lockset (white only)
- Standard Size - 3' x 6'8"
- Heavy Duty
- Available with 22" x 36" glass (with or without divided lite)
- Custom doors are available
Sliders with Crossbucks
- Sliding doors are available with crossbuck design.
Additional Information:
- Door clearance is 1' lower than wall height
- Aluminum vertical rails are standard
- Doors latch from the inside with a cam latch/jamb latch
- Color matches the walls, unless requested otherwise
- Split slider has interlocking steel meeting rail and center latch
- Bottom door track is standard
Single Sliders
Typical width: 10' or 12' (cannot exceed 12' wide)
Additional Information:
- Door clearance is 1' lower than wall height
- Aluminum vertical rails are standard
- Doors latch from the inside with a cam latch/jamb latch
- Color matches the walls, unless requested otherwise
- Split slider has interlocking steel meeting rail and center latch
- Bottom door track is standard
Split Sliders
Typical width: 12', 14', 15' & 20' (width of door is limited by width of building)
Additional Information:
- Door clearance is 1' lower than wall height
- Aluminum vertical rails are standard
- Doors latch from the inside with a cam latch/jamb latch
- Color matches the walls, unless requested otherwise
- Split slider has interlocking steel meeting rail and center latch
- Bottom door track is standard
Bottom Door Rail
Wind resistant bottom door rails provide stability when your sliding door is open.
Cam Latches / Jamb Latches
Cam latches are a flip latch. They are easy to operate, simply flip a small lever, and you can open the sliding door.
Frame-Out for Overhead Doors
- Typical width; 8', 9', 10', 12' or 16'.
- Openings are framed and trimmed for an overhead door. (door by others)
- Angled corners are optional.
Additional Information:
- Height is limited by the clearance needed for the housing or track - typical clearance is 2', therefore the door height is 2' lower than the wall height
- If you are pouring a concrete slab you must allow for the thickness of the concrete under the door
- Check with your door supplier to verify the rough opening size and required clearance
